E Series
Passive Loudspeakers
The E Series is a range of passive loudspeakers offering robust construction, trusted reliability and overall sonic performance beyond expectations. Intended for sound reinforcement in entertainment applications including live performance, DJ and dance music, karaoke and event production, E Series loudspeakers will deliver outstanding results. Building on QSC’s proven “Systems” methodology, the E Series loudspeakers’ performance is further enhanced when paired with QSC’s GXD amplifiers or with a QSC TouchMix digital mixer, and taking advantage of the on-board DSP and factory-tuned presets. These presets support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.
E Series consists of four models constructed of rugged plywood and coated in black, textured paint. Heavy-duty grilles lined with foam provide protection for the woofers and an elegant appearance. E110, E112 and E115 models are equipped with an all metal, dual-angle, 35mm socket that allows the loudspeaker to be mounted vertically on a pole or angled down by 10° to improve audience coverage and reduce rear wall reflections. Multiple mounting options using E Series Yoke or M8 / M10 eyebolts are supported. Input connections include dual NL4 as well as screw terminal receptacles. Additionally, all models feature ergonomic, aluminum handles to ease portability.
E Series Entertainment System DSP Tunings are available for GXD processing amplifiers.
- For GXD visit the GXD Firmware Updater
SELECT A MODEL
Model | E110 | E112 | E115 |
Configuration | 1 × 10-inch, 2-way non-powered | 1 × 12-inch, 2-way non-powered | 1 × 15-inch, 2-way non-powered |
Frequency Response (-6 dB) | 68 Hz – 20 kHz | 64 Hz – 20 kHz | 55 Hz – 20 kHz |
Frequency Range (-10 dB) | 50 Hz - 20 kHz | 46 Hz – 20 kHz | 43 Hz – 20 kHz |
Power capacity2: continuous/peak | 300 W / 1200 W | 400 W / 1600 W | 500 W / 2000 W |
Sensitivity | 95 dB, 1 W @ 1 m | 96 dB, 1 W @ 1 m | 97 dB, 1 W @ 1 m |
Coverage Angle | 85° conical DMT™ | 85° conical DMT™> | 75° conical DMT™ |
Output1 (Peak SPL @ 1M) | 126 dB | 128 dB | 130 dB |
Drivers LF
HF
|
254 mm (10 in) driver with 64 mm (2.5 in) voice coil; 25 mm (1 in) exit, 45 mm (1.75 in) voice coil, compression driver |
305 mm (12 in) driver with 76 mm (3 in) voice coil 25 mm (1 in) exit, 45 mm (1.75 in) voice coil, compression driver |
381 mm (15 in) driver with 89 mm (3.5 in) voice coil 38 mm (1.5 in) exit, 71 mm (2.8 in) voice coil, |
Nominal Impedance | 8 Ω | 8 Ω | 8 Ω |
Cross-over | Full-range only, 1.8 kHz | Full-range only, 1.8 kHz | Full-range only, 1.55 kHz |
Input Connectors | 2 × NL4 1 × barrier strip | 2 × NL4 1 × barrier strip | 2 × NL4 1 × barrier strip |
Enclosure | Multi-angle, plywood, black texture paint finish. One top mounted handle. Perforated, powder-coated steel grille with foam lining. | Trapezoidal, plywood, black texture paint finish. Two side mounted handles. Perforated, powder-coated steel grille with foam lining. | Trapezoidal, plywood, black texture paint finish. Two side mounted handles. Perforated, powder-coated steel grille with foam lining. |
Mounting and suspension | 9 × M8 suspension points, dual angle, 35 mm pole-socket | 3 × M10 suspension points, dual angle, 35 mm pole-socket | 3 × M10 suspension points, dual angle, 35 mm pole-socket |
Net Weight | 20 kg / 44lb | 23 kg / 51 lb | 31 kg / 68 lb |
Shipping Weight | 23 kg / 50 lb | 25.4 kg / 56 lb | 35.4 kg / 78 lb |
Dimensions | 330 × 560 × 330 mm 13 × 22 × 13 in | 360 × 616 × 371 mm 14.2 × 24.2 × 14.6 in | 420 × 716 × 445 mm 16.5 × 28.2 × 17.5 in |
1 With QSC Processing
2 Power that the device can withstand for two hours without permanent change in acoustical, mechanical, or electrical characteristics, greater than 10%, using IEC60268 noise based on nominal impedance in the cabinet with Xover, full range 30 Hz 12 dB/oct.
Specifications are subject to change with out notice.
Model | E118sw |
Configuration | 1 × 18-inch, subwoofer non-powered |
Frequency Response (-6 dB) | 37 Hz to 230 Hz |
Frequency Range (-10 dB) | 32 Hz - 230 Hz |
Power capacity2: continuous/peak | 800 W / 3200 W |
Sensitivity | 98 dB, 1 W @ 1 m |
Output1 (Peak SPL @ 1M) | 133 dB |
Drivers LF HF | 457 mm (18 in) driver with 102 mm (4 in) voice coil N/A |
Nominal Impedance | 4 Ω |
Cross-over | Recommended 80 – 120 Hz LPF |
Input Connectors | 2 × NL4 1 × barrier strip |
Enclosure | Rectangular, plywood, black texture paint finish. Four side mounted handles. Rear panel provision for optional 3" casters. Perforated, powder-coated steel grille with foam lining. |
Mounting and suspension | M20 threaded pole mount socket, 24" (610 mm) pole included |
Net Weight | 43 kg / 95 lb |
Shipping Weight | 46.3 kg / 102 lb |
Dimensions | 590 × 616 × 605 mm 23.2 × 24.2 × 23.8 in |
Details |
1 With QSC Processing
2 Power that the device can withstand for two hours without permanent change in acoustical, mechanical, or electrical characteristics, greater than 10%, using IEC60268 noise based on nominal impedance in the cabinet with Xover, full range 30 Hz 12 dB/oct.
Specifications are subject to change with out notice.