E118sw
The E118sw is a high-performance direct radiation subwoofer with a single, 800W, 18-inch, aluminum frame woofer. It’s designed to produce crushing low-end for live performance with kick-drum and bass in the PA or for high-level, high-energy dance music. A threaded, M20 pole socket and speaker pole are provided for sub/satellite use with any of the E Series two-way models. For portable applications it includes attachment points for four optional casters. The subwoofer’s 4-ohm impedance means that a single woofer can be optimally powered by a less expensive amplifier.
E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.
Features
- High output, professional quality sound with 800 W continuous power
- E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.
- E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers:
- For PLD/CXD visit Amplifier Navigator Software
- For GXD visit the GXD Firmware Updater
- Rugged tour-grade textured paint
- Foam-lined perforated steel grill
- E18SW includes speaker pole
Specifications
Model | E118sw |
---|---|
Configuration | 1 × 18-inch, subwoofer, non-powered |
Frequency Response (-6 dB) | 37 Hz to 230 Hz |
Frequency Range (-10 dB) | 32 Hz to 230 Hz |
Power capacity1: continuous/peak | 800 W / 3200 W |
Sensitivity | 98 dB, 1 W @ 1 m |
Coverage Angle | N/A |
Ouput2 (peak SPL @ 1 m) | 133 dB |
Drivers LF HF |
457 mm (18 in) driver with 102 mm (4 in) voice coil N/A |
Nominal Impedance | 4Ω |
Cross-over | Recommended 80 – 120 Hz LPF |
Input connectors | 2 × NL4, 1 × barrier strip |
Enclosure | Rectangular, plywood, black texture paint finish. Four side mounted handles. Rear panel provision for optional 4-inch casters. Perforated, powder-coated steel grille with foam lining. |
Mounting and suspension | M20 threaded pole-mount socket 610 mm (24 in) pole included |
Speaker Dimensions (W×H×D) | 590 × 616 × 605 mm 23.2 × 24.2 × 23.8 in |
Carton Dimensions (W×H×D) | 710 × 690 × 712 mm 28 × 27 × 28 in |
Net weight | 43 kg / 95 lb |
Shipping weight | 46.3 kg / 102 lb |
1 Power that the device can withstand for two hours without permanent change in acoustical, mechanical, or electrical characteristics, greater than 10%, using IEC60268 noise based on nominal impedance in the cabinet with Xover, full range 30 Hz 12 dB / octave.
2 With QSC Processing
*Specifications subject to change without notice.